Boat gelcoat repair can be time-consuming and difficult. Color matching is nearly impossible. Sanding cured gel and containing flakes can be a nightmare. Professionals can repair a boat's finish. The process requires wet sanding and buffing. Both are labor-intensive and expensive when done professionally. Shine-On recreates the shine of a new boat finish without the expense and effort of repairing the gelcoat.
Gelcoat is sprayed on the exterior of fiberglass boats as a clear, glossy finish. In the beginning, it is durable. It then becomes pockmarked with scratches and dings. The coating can blister if water seeps between the laminate and the coating. The finish can also yellow prematurely.
Repairing the actual finish demands a lot of sanding and time. Professionals start with a piece of 220-grit automotive sandpaper, and they sand down the edges of the spot to be repaired. After cleaning the spot with acetone, they use masking tape to protect the undamaged finish. They apply the coating, but they have to work quickly and with precision because the gel kicks off within five to ten minutes of application.
The entire curing process completes overnight. Then, the never-ending sanding begins. Professionals wet sand with 220-grit paper and a rubber sander. Then they switch to 400-grit paper and sand again. Then they switch to 1000-grit sandpaper and sand some more. They have to use rubbing compound to get rid of all of the scratches. Then they wax and buff the boat.
Shine-On delivers a beautiful finish for a relatively low price. It lasts for a great deal of time without yellowing. It comes with standard UV protection. No sanding or buffing is required. Owners do not have to wait more than twelve hours for the finish to cure. The only prep work consists of cleaning the surface. Then, owners can apply Shine-On with the enclosed cloth. The shine will bring back the shine and gleam that the craft had when it was new.
One Shine-On kit includes an instruction booklet, a surface cleaning pad, and surface cleaning liquid. It provides an application towel, a bottle of Shine-On clearcoat, and a remover for application errors. One kit covers an entire thirty-foot long craft.
Leisure time is a precious commodity in our busy world. Boaters want to spend their weekends on the water. They don't want to spend them slaving away in a garage. Shine-On provides maximum shine with minimal time. It gives owners a great finish without the effort and expense of a boat gelcoat repair.
Gelcoat is sprayed on the exterior of fiberglass boats as a clear, glossy finish. In the beginning, it is durable. It then becomes pockmarked with scratches and dings. The coating can blister if water seeps between the laminate and the coating. The finish can also yellow prematurely.
Repairing the actual finish demands a lot of sanding and time. Professionals start with a piece of 220-grit automotive sandpaper, and they sand down the edges of the spot to be repaired. After cleaning the spot with acetone, they use masking tape to protect the undamaged finish. They apply the coating, but they have to work quickly and with precision because the gel kicks off within five to ten minutes of application.
The entire curing process completes overnight. Then, the never-ending sanding begins. Professionals wet sand with 220-grit paper and a rubber sander. Then they switch to 400-grit paper and sand again. Then they switch to 1000-grit sandpaper and sand some more. They have to use rubbing compound to get rid of all of the scratches. Then they wax and buff the boat.
Shine-On delivers a beautiful finish for a relatively low price. It lasts for a great deal of time without yellowing. It comes with standard UV protection. No sanding or buffing is required. Owners do not have to wait more than twelve hours for the finish to cure. The only prep work consists of cleaning the surface. Then, owners can apply Shine-On with the enclosed cloth. The shine will bring back the shine and gleam that the craft had when it was new.
One Shine-On kit includes an instruction booklet, a surface cleaning pad, and surface cleaning liquid. It provides an application towel, a bottle of Shine-On clearcoat, and a remover for application errors. One kit covers an entire thirty-foot long craft.
Leisure time is a precious commodity in our busy world. Boaters want to spend their weekends on the water. They don't want to spend them slaving away in a garage. Shine-On provides maximum shine with minimal time. It gives owners a great finish without the effort and expense of a boat gelcoat repair.
About the Author:
You can get the inside scoop on an great alternative to boat Gelcoat repair now by having a quick look at our review on the best fiberglass cleaner
No comments:
Post a Comment